358 Anti-Climb Mesh Fencing
The mesh specified for substations, rail corridors, defence sites and data centres. No handhold, no foothold, and nothing a hand tool can cut quickly.
358 Anti-Climb Mesh across Sydney and NSW
358 mesh, also called anti-climb mesh, is the product LS Fencing Services installs when security is the whole point. The 76.2 x 12.7mm aperture and 4mm wire leave no purchase for fingers, boots or bolt cutters. It is the preferred fence for Transport for NSW stations and stabling yards, Department of Defence sites, Ausgrid, Endeavour Energy and Essential Energy substations, correctional facilities and data centres.
A typical specification uses 100UC structural steel posts with 50 x 50mm equal angle rails top and bottom, panels 2400mm wide in 2400mm, 2700mm or 3000mm heights, and a choice of standard angle, croc top, bulldog spike or razor barb toppings. Posts, rails and brackets are hot-dip galvanised, with powder coat available in black or any Dulux colour. Matching sliding and swing gates, pedestrian gates and full automation are supplied by the same team.
- 76.2 x 12.7mm mesh, 4mm wire, V press top and bottom
- Heights of 2400mm, 2700mm and 3000mm
- Hot-dip galvanised, optional powder coat
- Croc top, spike, razor barb or standard toppings
- Tamper-proof fixings and security washers
- Matching gates and automation
358 Anti-Climb Mesh installed by LS Fencing Services
Real jobs, not stock photography.
- Essential Energy Forest Glen switching station: 358 anti-climb mesh perimeter with razor wire topping, 2026
- Uungula Wind Farm, near Wellington: substation perimeter fencing, 2026
From tender to handover
The same sequence on a 100 metre school fence and a 3 kilometre substation perimeter. Drawings in, documented perimeter out.
- Step 1
Send the scope
Call 1800 572 878 or send the drawings, spec or a quick brief through the form. A site walk can be arranged across Sydney, the Illawarra and NSW.
- Step 2
Detailed Proposal
LS Fencing Services confirms the product, heights, posts, footings, gates and automation against the specification and returns a detailed proposal, usually within 5 business days.
- Step 3
Fabrication and installation
Materials are sourced and fabricated to spec. Shop drawings, ITPs and SWMS are delivered before mobilisation, then licensed installers deliver on program with daily reporting.
- Step 4
Handover and support
Test, commission and sign off against the ISO 9001 quality plan, with a full documentation pack. Maintenance and reactive repair are available after handover.
Related products
Palisade Fencing
Hot-dip galvanised W profile steel pales with flat or triple spike tops. The institutional grade fence for depots, schools and government sites.
Get a palisade quote
Chainwire Fencing
Boundary, perimeter and sports chainwire in galvanised or PVC coated black or green. Built to AS 1725 and the specs RMS, Transport for NSW and Sydney Water ask for.
Get a chainwire quote
Crimp Top Tubular (Pressed Spear)
Pressed spear tubular steel panels in black powder coat. Strong, cost-effective and tidy enough for schools, corporate and civic sites.
Get a crimp top quote
Tubular Fencing
Welded and powder coated tubular steel or aluminium for the sites where security has to look good too: corporate, civic and education.
Get a tubular fencing quoteTrusted by tier 1 builders, utilities and government
Questions specifiers ask
Anything not covered here, the office answers on 1800 572 878 during business hours.
What fencing products does LS Fencing Services install?
Chainwire, 358 anti-climb mesh, palisade, crimp top tubular (pressed spear), tubular fencing, timber hoarding, RMS pedestrian fencing, sliding and swing gates, gate automation, Monowill handrails, razor wire, high security perimeter systems and storage cages.
Which areas do you cover?
LS Fencing Services is based in Unanderra and works across Sydney, Western Sydney, the Illawarra, the Shoalhaven and South Coast, the Southern Highlands, Newcastle and the Hunter, and regional NSW for utility, wind farm and solar farm projects.
Are your products compliant with Australian Standards?
Yes. Products are supplied and installed to the relevant Australian Standards and the project specification, including AS 1725 for chainwire, AS/NZS 1170.1 for handrails and the RMS and Transport for NSW specifications for pedestrian fencing. The business runs ISO 9001, 14001 and 45001 certified management systems.
Do you work on tier 1 and government sites?
Yes. LS Fencing Services has delivered for Lendlease, CPB Contractors, Acciona, FDC, Zauner and other tier 1 builders, and for TransGrid, Endeavour Energy, Essential Energy, Jemena, Sydney Water, NSW Health and Department of Defence sites. SWMS, ITPs and site inductions are standard.
How quickly can I get a quote?
Send the drawings, specification or a brief through the form or call 1800 572 878. Detailed quotes are usually returned within 5 business days, sooner for simple scopes.
What is the lead time for installation?
It depends on the product, the quantity and the site. Standard chainwire and hoarding can mobilise quickly. 358 mesh, palisade and automated gates are fabricated to the specification first. A program is confirmed with the quote.
Do you offer gate automation and access control?
Yes. Operators are sized to the gate and its duty cycle, with remotes, safety beams, induction loops, keypads, swipe cards and fobs, timers, flashing lights, alarms, key switches and traffic lights available.
Are the materials corrosion resistant?
Steel is hot-dip galvanised or pre-galvanised, with polyester powder coat available in black or the Dulux range. Razor wire is available in galvanised or stainless steel.
Can you match gates to the fence line?
Yes. Sliding, swing and pedestrian gates are fabricated with the same infill as the fence, whether 358 mesh, palisade, crimp top tubular, tubular or chainwire.
Do you provide maintenance and repairs?
Yes. LS Fencing Services offers maintenance, reactive repair, safety audits and inspections for existing fence lines and gates.
Need 358 anti-climb mesh specified, priced or installed?
Send the drawings, the spec or a quick brief. LS Fencing Services returns an engineered quote, usually within 5 business days.