Commercial Security Fencing Regional NSW
Renewable energy and transmission projects across regional NSW are a growing share of LS Fencing Services' work.
Substation, Wind Farm & Solar Farm Security Fencing in Regional NSW
The 3 metre high security fence with razor wire and concrete plinth for TransGrid at the New England Solar Farm near Uralla, the 358 mesh perimeter at Essential Energy's Forest Glen switching station and the substation perimeter at the Uungula Wind Farm near Wellington were all delivered by crews working away from base, with accommodation, plant and materials logistics handled by LS Fencing Services.
LS Fencing Services is based in Unanderra and runs every project under its ISO 9001, 14001 and 45001 certified systems, so Regional NSW sites get the same SWMS, inspection and test plans and documented handover as the tier 1 work in Sydney.
- 358 mesh, palisade, chainwire and tubular
- Sliding and swing gates with automation
- Timber hoarding and RMS pedestrian fencing
- Quotes from drawings or a site walk
Services in Regional NSW
Every product below is supplied and installed in Regional NSW by the same crews, under the same ISO certified systems. Open a product for its specification, photos and quote form.
358 Anti-Climb Mesh
Get a 358 mesh quote
Palisade Fencing
Get a palisade quote
Chainwire Fencing
Get a chainwire quote
Crimp Top Tubular (Pressed Spear)
Get a crimp top quote
Tubular Fencing
Get a tubular fencing quote
Timber Hoarding
Get a hoarding quote
RMS Pedestrian Fence
Get a pedestrian fence quote
Sliding Gates
Get a sliding gate quote
Swing Gates
Get a swing gate quote
Gate Automation
Get a gate automation quote
Monowill Handrails
Get a handrail quote
Razor Wire
Get a razor wire quote
High Security Fencing
Get a high security quote
Storage Cages
Get a storage cage quote
Commercial and Industrial Security Fencing
Get a security fencing quoteFrom tender to handover
The same sequence on a 100 metre school fence and a 3 kilometre substation perimeter. Drawings in, documented perimeter out.
- Step 1
Send the scope
Call 1800 572 878 or send the drawings, spec or a quick brief through the form. A site walk can be arranged across Sydney, the Illawarra and NSW.
- Step 2
Detailed Proposal
LS Fencing Services confirms the product, heights, posts, footings, gates and automation against the specification and returns a detailed proposal.
- Step 3
Fabrication and installation
Materials are sourced and fabricated to spec. Shop drawings, ITPs and SWMS are delivered before mobilisation, then licensed installers deliver on program with daily reporting.
- Step 4
Handover and support
Test, commission and sign off against the ISO 9001 quality plan, with a full documentation pack. Maintenance and reactive repair are available after handover.
Frequently asked questions about Regional NSW
Anything not covered here, the office answers on 1800 572 878 during business hours.
How do you run a project hundreds of kilometres from base?
Crews work away from base with accommodation, plant and materials logistics handled by LS Fencing Services. The 3 metre fence for TransGrid at the New England Solar Farm near Uralla, the 358 mesh perimeter at Essential Energy's Forest Glen switching station and the substation perimeter at the Uungula Wind Farm near Wellington were all delivered this way.
What does a solar farm or wind farm perimeter usually involve?
A high security line to the asset owner's specification, typically 358 mesh or palisade with a topping such as razor wire, a concrete plinth where tunnelling is a risk, and automated, access controlled vehicle and pedestrian gates. The TransGrid fence at New England Solar Farm was 3 metres high with razor wire and a concrete plinth.
Do you fence substations and switching stations?
Yes. 358 mesh perimeters, palisade, razor wire and automated gates for Essential Energy, TransGrid, Endeavour Energy and Ausgrid assets, installed by inducted crews under the ISO 9001, 14001 and 45001 systems.
How far will you travel?
Across regional NSW and interstate for utility, data centre, wind farm and solar farm projects. Renewable energy and transmission work is a growing share of what LS Fencing Services does, so remote sites are routine rather than exceptional.
What is the lead time on a regional project?
Mesh, pales, posts and gates are fabricated and galvanised to the specification first, then freighted to site with the plant, so the program includes the fabrication, the logistics and the crew rotation. It is set out in full with the quote.
Need commercial fencing in Regional NSW?
Send the drawings, the spec or a quick brief. LS Fencing Services returns a detailed proposal against the specification.