Commercial Swing Gates Sydney and NSW
Heavy duty vehicle and pedestrian swing gates on engineered post systems, hot-dip galvanised and powder coated to match the perimeter.
Swing Gates across Sydney, NSW and Australia wide
Swing gates are the simplest way to control vehicle access at a security point, and LS Fencing Services has fabricated them for more than a decade. Each gate sits on an engineered heavy duty post system with adjustable hinges and either deep or shallow mount footings to suit the site.
Openings run up to 8 metres, with automated opening speeds as fast as 5 seconds. All fabricated steel is hot-dip galvanised and powder coated in the colour of your choice, and infill is matched to the fence, whether that is 358 mesh, palisade or tubular. At Endeavour Energy's Eastern Creek substation the team installed two 6 metre double swing gates infilled with 358 mesh alongside a pedestrian security gate.
- Engineered heavy duty post systems
- Adjustable hinges, drop bolts and lockable latches
- Openings to 8 metres
- Deep or shallow mount footings
- Hot-dip galvanised and powder coated
- Pedestrian gates to match
From tender to handover
The same sequence on a 100 metre school fence and a 3 kilometre substation perimeter. Drawings in, documented perimeter out.
- Step 1
Send the scope
Call 1800 572 878 or send the drawings, spec or a quick brief through the form. A site walk can be arranged across Sydney, the Illawarra and NSW.
- Step 2
Detailed Proposal
LS Fencing Services confirms the product, heights, posts, footings, gates and automation against the specification and returns a detailed proposal.
- Step 3
Fabrication and installation
Materials are sourced and fabricated to spec. Shop drawings, ITPs and SWMS are delivered before mobilisation, then licensed installers deliver on program with daily reporting.
- Step 4
Handover and support
Test, commission and sign off against the ISO 9001 quality plan, with a full documentation pack. Maintenance and reactive repair are available after handover.
Swing Gates across Sydney and NSW
LS Fencing Services supplies and installs swing gates in every region it covers, with crews working from Unanderra or travelling to site. Open a region for the local work and the questions that come up there.
LS Fencing Services is based in Unanderra, so Wollongong, Port Kembla, Shellharbour, Dapto and Kiama are home ground.
Swing Gates in Illawarra SydneyMost of LS Fencing Services' tier 1 builder and utility work is across metropolitan Sydney.
Swing Gates in Sydney Western SydneyWestern Sydney is where the substations, industrial estates and logistics parks are, and where a lot of LS Fencing Services' 358 mesh goes in.
Swing Gates in Western Sydney Shoalhaven and South CoastNowra, Bomaderry, Ulladulla, Callala Bay and the South Coast are a short run from the Unanderra head office.
Swing Gates in South Coast Southern HighlandsBowral, Moss Vale, Mittagong and the Southern Highlands sit between the Illawarra head office and the Hume corridor.
Swing Gates in Southern Highlands Central Coast, Newcastle and the HunterGosford, Newcastle, Maitland and the Hunter industrial belt are covered from Sydney with crews that travel.
Swing Gates in Newcastle and Hunter Regional NSWRenewable energy and transmission projects across regional NSW are a growing share of LS Fencing Services' work.
Swing Gates in Regional NSWRelated products
Sliding Gates
Track and cantilever sliding gates in light and heavy duty, powder coated to match the fence, automated to suit the traffic through them.
Get a sliding gate quote
Gate Automation
Operators sized to duty cycle and gate weight, plus remotes, safety beams, loops, keypads, cards, fobs, timers and traffic lights.
Get a gate automation quoteTrusted by Tier 1 contractors, data centres, education and government across Australia
Frequently asked questions about swing gates
Anything not covered here, the office answers on 1800 572 878 during business hours.
Should I choose a swing gate or a sliding gate?
A swing gate suits an opening up to 8 metres where there is room for the leaves to swing clear of traffic and parking. A sliding gate suits wider openings, sites with no swing room and exposed sites where wind would load a swing leaf. LS Fencing Services makes both and will say which one fits the site.
How wide can a commercial swing gate be?
Openings run up to 8 metres as a single leaf or a pair. At Endeavour Energy's Eastern Creek substation the team installed two 6 metre double swing gates infilled with 358 mesh alongside a pedestrian security gate. Wider openings normally go to a sliding gate.
Can a swing gate be automated?
Yes. Operators are sized to the gate weight, the duty cycle and the wind exposure, with opening speeds as fast as 5 seconds. Two remotes and photo-electric safety beams are included, and keypads, cards, fobs, loops, timers and traffic lights can be added.
What infill and finish options are there?
The infill is matched to the fence line, whether that is 358 mesh, palisade, crimp top tubular, tubular or chainwire. All fabricated steel is hot-dip galvanised and powder coated in the colour of your choice, and pedestrian gates are made to match.
What affects the price of a swing gate?
The opening width, the infill, whether it is automated and what access control is wired in, the footings (deep or shallow mount), the hinge and locking hardware and the finish. Send the opening size and the fence type and LS Fencing Services returns a detailed proposal.
How long does a swing gate take?
Each gate is fabricated to the opening and infill, then hot-dip galvanised and powder coated, so there is a fabrication period before the posts go in. Where the gate is part of a new fence line it is programmed with the fence. The program is confirmed with the quote.
Need swing gates specified, priced or installed?
Send the drawings, the spec or a quick brief. LS Fencing Services returns a detailed proposal against the specification.