Crimp Top Tubular Fencing
Pre-galvanised, black powder coated square hollow sections with pressed spear tops. Cost-effective security that still looks right on a school or corporate site.
Crimp Top Tubular (Pressed Spear) across Sydney, NSW and Australia wide
Crimp top tubular fencing, also called pressed spear or Eminence fencing, is built from square hollow steel sections welded into panels, with 25 x 25 x 1.2mm vertical spears, 40 x 40 x 1.6mm rails and 65 x 65 x 2.5mm posts fitted with security brackets. Pre-galvanised steel and a polyester powder coat, black as standard, give it a long life and a clean finish.
Panels are square as standard and can be stepped to follow the land. For steep or sweeping sites, LS Fencing Services fabricates raked panels to match the ground line. Matching sliding and swing vehicle gates and pedestrian gates are available, along with the full automation range. LS Fencing Services installed more than 900 lineal metres of pressed spear fencing at Budawang School.
- 25 x 25 x 1.2mm spears, 40 x 40 x 1.6mm rails
- 65 x 65 x 2.5mm posts with security brackets
- Black powder coat standard, other colours to order
- Raked panels for sloping sites
- Matching gates and automation
- Schools, corporate, civic and government sites
Crimp Top Tubular (Pressed Spear) installed by LS Fencing Services
Real jobs, not stock photography.
- Budawang School: more than 900 lineal metres of pressed spear fencing in blue grey
From tender to handover
The same sequence on a 100 metre school fence and a 3 kilometre substation perimeter. Drawings in, documented perimeter out.
- Step 1
Send the scope
Call 1800 572 878 or send the drawings, spec or a quick brief through the form. A site walk can be arranged across Sydney, the Illawarra and NSW.
- Step 2
Detailed Proposal
LS Fencing Services confirms the product, heights, posts, footings, gates and automation against the specification and returns a detailed proposal.
- Step 3
Fabrication and installation
Materials are sourced and fabricated to spec. Shop drawings, ITPs and SWMS are delivered before mobilisation, then licensed installers deliver on program with daily reporting.
- Step 4
Handover and support
Test, commission and sign off against the ISO 9001 quality plan, with a full documentation pack. Maintenance and reactive repair are available after handover.
Crimp Top Tubular (Pressed Spear) across Sydney and NSW
LS Fencing Services supplies and installs crimp top tubular fencing in every region it covers, with crews working from Unanderra or travelling to site. Open a region for the local work and the questions that come up there.
LS Fencing Services is based in Unanderra, so Wollongong, Port Kembla, Shellharbour, Dapto and Kiama are home ground.
Crimp Top Tubular in Illawarra SydneyMost of LS Fencing Services' tier 1 builder and utility work is across metropolitan Sydney.
Crimp Top Tubular in Sydney Western SydneyWestern Sydney is where the substations, industrial estates and logistics parks are, and where a lot of LS Fencing Services' 358 mesh goes in.
Crimp Top Tubular in Western Sydney Shoalhaven and South CoastNowra, Bomaderry, Ulladulla, Callala Bay and the South Coast are a short run from the Unanderra head office.
Crimp Top Tubular in South Coast Southern HighlandsBowral, Moss Vale, Mittagong and the Southern Highlands sit between the Illawarra head office and the Hume corridor.
Crimp Top Tubular in Southern Highlands Central Coast, Newcastle and the HunterGosford, Newcastle, Maitland and the Hunter industrial belt are covered from Sydney with crews that travel.
Crimp Top Tubular in Newcastle and Hunter Regional NSWRenewable energy and transmission projects across regional NSW are a growing share of LS Fencing Services' work.
Crimp Top Tubular in Regional NSWRelated products
358 Anti-Climb Mesh
Australia's most specified high security mesh. Climb and cut resistant, the standard for substations, rail and critical infrastructure.
Get a 358 mesh quote
Palisade Fencing
Hot-dip galvanised W and D profile steel pales with flat top or triple spire. The institutional grade fence for substations, schools and government sites.
Get a palisade quote
Chainwire Fencing
Boundary, perimeter and sports chainwire in galvanised or PVC coated black or green. Built to AS 1725 and the specs RMS, Transport for NSW and Sydney Water ask for.
Get a chainwire quote
Tubular Fencing
Welded and powder coated tubular steel or aluminium for the sites where security has to look good too: corporate, civic and education.
Get a tubular fencing quoteTrusted by Tier 1 contractors, data centres, education and government across Australia
Frequently asked questions about crimp top tubular fencing
Anything not covered here, the office answers on 1800 572 878 during business hours.
What is the difference between crimp top tubular, pressed spear and palisade fencing?
Crimp top tubular and pressed spear are the same product: square hollow steel sections welded into panels, with the top of each vertical pressed into a spear. Palisade is a different system built from steel pales bolted to horizontal rails, specified where impact resistance and a heavier deterrent are needed. Crimp top is the choice where security has to look tidy.
Where is crimp top tubular fencing normally used?
Schools, corporate sites, civic buildings and government facilities, where the fence needs to secure the boundary without looking industrial. LS Fencing Services installed more than 900 lineal metres of pressed spear fencing at Budawang School.
Can the panels follow a sloping site?
Yes. Panels are square as standard and can be stepped to follow the land. For steep or sweeping sites LS Fencing Services fabricates raked panels that match the ground line, so there is no gap under the fence and no stepped look.
What finish and colours are available?
The steel is pre-galvanised and finished in polyester powder coat, black as standard. Other colours in the Dulux range are available to order. Posts are 65 x 65 x 2.5mm with security brackets, rails 40 x 40 x 1.6mm and spears 25 x 25 x 1.2mm.
What affects the price of a crimp top tubular fence?
Height, the length of the run, raked versus stepped panels, the number and size of gates, whether the gates are automated, post footings and the finish. Send the drawings or a site plan and LS Fencing Services returns a detailed proposal.
How long is the lead time?
Panels, posts and gates are fabricated and powder coated to the specification, so there is a fabrication period before installation. Matching sliding, swing and pedestrian gates are made at the same time so the whole boundary goes in together. The program is confirmed with the quote.
Need crimp top tubular specified, priced or installed?
Send the drawings, the spec or a quick brief. LS Fencing Services returns a detailed proposal against the specification.